Irrigation Systems

We disconnect the existing system from the mains and simply change its water source to the new bore, connected by the piping system. The controller can be rewired to the new box. This is a simple turn-key solution that we carry out in most integration systems.

All maintenance or service work is subject to our competitive $ 110 /hr (incl. GST) rate or $ 121 /hr for an electrician, with a proportional call-out fee for direct transit to site; unless otherwise stated prior.

On-site inspections include the assessment of the property, bore, pump and irrigation system set-up. These are quoted, as a standard, at $ 330 (incl. GST), including mobilisation of a tradesman within the Perth area, and include any work that can be completed during the 1-hour booking

Although products used may vary across different tasks, our chosen product supplies are predominantly made up of the Hunter™ sprinkler range, recognised as the market leader in sprinkler innovation. Other reputable examples include, but are not limited to, Toro™, Philmac™ and Weathermatic™.

We will happily provide a complete explanation of the system’s entirety and run all interested parties through the various functions and settings of both the controller and stations subject to it.

A sheet with station information and our contact information will be present on the door of any controller we install for future follow up or query.

Due to the varied nature of garden and lawn layouts, spray coverage must be custom designed to be effective. The range of parts used and nature of the install itself can also widely vary by individual need, leaving an onsite inspection the only effective method of cost estimation.

An actionable quote is gladly provided upon request, free of any charge.

A service professional will visit and assess the relevant site to:

• Take water pressure measurements and pump specifications where applicable;
• Plan potential access runs for necessary services, both pipe-working and electrical, including access for running services beneath hard surfaces;
• Take head placement measurements and necessary part listings.

This information is then assessed and a quote is put together and sent through for assessment. If the on-site visit requires any work to be completed, likely if the tools are out, there might be a service charge, depending on the service provided. This is always discussed prior to any work being completed and charged.

Once finalised, any quote prices agreed upon will be honoured. In rare circumstances where situations could not be reasonably predicted, surcharges may be discussed, always prior to further action.